Page 1 of 5 123 ... LastLast
Results 1 to 10 of 41

Thread: Share your OSW Settings

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    50

    Share your OSW Settings

    I've seen several posts about OSW settings so I figured it would be good to have a thread where all OSW users can post their settings to help other out. So if you have been using your OSW for a while and have it dialed in please share your settings. I attached pics of my Default set which I use with my 330mm rim.

    Hardware:

    HRS servo similar to the Small MiGe with Ioni drive 500 watt AnTek psu.

    Click images for full size

    Attachment 19954Attachment 19955Attachment 19956Attachment 19957Attachment 19958Attachment 19959

    Edit: You should set MUL/DIV (50%/50%) to a value that result to 100% if not you won't get the full range that the Motor can deliver, playing with these filters will introduce a lag in response behaviour.

    controller.json:

    "Steering effects strength":-10000,
    "Rumble strip pull factor":-1.5
    "Steering resistance type":0,
    "Steering torque capability":18,
    "Steering torque filter":3,
    "Steering torque minimum":0,
    "Steering torque per-vehicle mult":0.83,
    "Steering torque sensitivity":1,

  2. #2
    Great stuff!

    Do you keep different presets for openwheelers/gt/road cars in terms of strengths and steering lock?

    I hope the guys who work on the drivers can have rF2/any sim of your choice control steering lock in the future

  3. #3
    Member
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    50
    Quote Originally Posted by wgeuze View Post
    Great stuff!

    Do you keep different presets for openwheelers/gt/road cars in terms of strengths and steering lock?
    I make different Mmos profiles for most cars mainly to get the right steering lock

  4. #4
    Okay cool that is fine for now

  5. #5
    cookie built my osw and I have now used his settings and its so much better. The wheel was already awesome and now better awesome. LOL

  6. #6
    Junior Member
    Join Date
    Jan 2012
    Posts
    10

    Talking

    Quote Originally Posted by cookie View Post
    I make different Mmos profiles for most cars mainly to get the right steering lock
    Thanks for all the advice and pointing me in the right direction, copied your settings and much better, wow this thing has some power... Anyway how do you deal with steering lock, i can't get the flat 6 (for example) to match on screen wheel rotation to OSW wheel?

    edit: Think i figured out what you meant above, set both MMOS and vehicle set to the same rotation

  7. #7
    Member
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    50
    Great your up and running there a few settings that you should play with to suit your personal taste, one is TBW (torque bandwidth)you can go as high as 3300Hz and low as 150Hz the other is in game Steering torque filter, I prefer a more rounder FFB but others prefer harsher FFB. Another thing worth doing is a auto tune in machine tab (measure resistance & induction).

  8. #8
    Junior Member
    Join Date
    Jan 2012
    Posts
    10
    Quote Originally Posted by cookie View Post
    Great your up and running there a few settings that you should play with to suit your personal taste, one is TBW (torque bandwidth)you can go as high as 3300Hz and low as 150Hz the other is in game Steering torque filter, I prefer a more rounder FFB but others prefer harsher FFB. Another thing worth doing is a auto tune in machine tab (measure resistance & induction).
    Great I've done the auto tune now finding it so different after a G25 the strength is insane, how people drive this let along bigger servos anywhere near full is beyond me. I'm running your settings in Granity and 60% force in MMOS but for the Apex GT mod i'm at 0.5 vehicle specific, is that ok or should i be dropping force in MMOS more?

  9. #9
    Please take into consideration that you now have the luxury of dialing in greater forces than the actual cars do. More power isn't always the most realistic option.

    I'm hoping to receive a small mige next week myself, can't freaking wait to hook it up once the electronics are done

  10. #10
    Senior Member
    Join Date
    Jun 2013
    Location
    Coevorden Netherlands
    Posts
    157
    Markj i think it's better to set 100% in mmos and tone down to your likings the ffb multiplier in game. You will feel the lower forces way better. I'm running apex cars at 0.4 to 0.5 ingame

Similar Threads

  1. G27...customizing settings
    By Fritzy in forum rFactor 1 Technical Support
    Replies: 3
    Last Post: 07-01-2014, 03:46 PM
  2. Fanatec CSW with BMW or Formula rim owners - Share your settings
    By GTFREAK in forum Hardware Building/Buying/Usage Advice
    Replies: 23
    Last Post: 10-16-2012, 09:42 PM
  3. G27 settings
    By menco in forum Hardware Building/Buying/Usage Advice
    Replies: 1
    Last Post: 07-15-2012, 04:39 PM
  4. Server Settings
    By miltec in forum rFactor 1 Technical Support
    Replies: 1
    Last Post: 01-13-2012, 05:13 PM
  5. FFB settings
    By CordellCahill in forum rFactor 1 General Discussion
    Replies: 4
    Last Post: 04-29-2011, 07:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •