NOTICE Notice: This is an old thread and information may be out of date. The last post was 553 days ago. Please consider making a new thread.
Results 1 to 18 of 18

Thread: OSW RF2 Setup

  1. #1
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10

    OSW RF2 Setup

    Hi

    I have just built an OSW Sim wheel setup using the IONI driver and Mige 130st 10010 Motor
    I need an RFactor2 controller.json/MMO's setup that works!! has anybody had any success?
    every setup I try pulls you into corners it's as if that parameter needs reversing

  2. #2
    Registered Prodigy's Avatar
    Join Date
    Nov 2012
    Location
    Medulin, Croatia
    Posts
    858
    Look for this line in your controller.json:

    "Steering effects strength":-10000

    Default is at 10000, if you want to revert FFB, add a minus sign (-) like above.

  3. #3
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    Quote Originally Posted by Prodigy View Post
    Look for this line in your controller.json:

    "Steering effects strength":-10000

    Default is at 10000, if you want to revert FFB, add a minus sign (-) like above.
    Thanks that fixed that problem

    All I have to figure out now is how to remove the small hump around the wheel centre point, It is there for about 4 deg where the wheel drops of centre then its fine

    If I had to visualise it it would look something like this (I only had paint handy)


    Click image for larger version. 

Name:	Hump.png 
Views:	195 
Size:	2.9 KB 
ID:	19937

  4. #4
    Registered cookie's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    144
    I would start of by deleting the controller file then restart rFactor to create a new one, that way your starting of fresh, I've never had anything like what you're describing with my IONI OSW so something definitely not right.

  5. #5
    Registered wgeuze's Avatar
    Join Date
    Oct 2012
    Posts
    1,451
    Quote Originally Posted by cookie View Post
    I would start of by deleting the controller file then restart rFactor to create a new one, that way your starting of fresh, I've never had anything like what you're describing with my IONI OSW so something definitely not right.
    Is it possible to start a new topic with the means of keeping track of all settings for IONI based OSW projects?
    I think many would benefit to have some form of a documented, tested, point to start from
    Last edited by wgeuze; 05-09-16 at 09:14 AM.

  6. #6
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    Thanks

    I did what you suggested its the same, do you have your JSON file so I could take a look, I'm using the SimuCUBE Prototype it may be something to do with that

  7. #7
    Registered cookie's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    144
    Probably is SimuCUBE mode I tried all the new settings with the updated IONI firmware and couldn't find anything I liked so I reverted back to my old settings. SimuCUBE mode definitely changed the feel around the center I think it's iRacing based like most things in the OSW world

  8. #8
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    How do you have the encoder set in Granity and MMOs ?

  9. #9
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    How do you have the encoder set in Granity and MMOs ?

    Don't know how that happened cant delete the post

  10. #10
    Registered cookie's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    144
    In Mmos for a 5k encoder, cpr 20,000 and in Granity 5000 ppr

  11. #11
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    Quote Originally Posted by cookie View Post
    In Mmos for a 5k encoder, cpr 20,000 and in Granity 5000 ppr
    Same as my setup, I have tried all the settings I can think of but the centering problem still remains

  12. #12
    Registered Eddy's Avatar
    Join Date
    Jun 2013
    Location
    Coevorden Netherlands
    Posts
    974
    Quote Originally Posted by mx1703 View Post
    Same as my setup, I have tried all the settings I can think of but the centering problem still remains
    I hope my simucube arrives soon so i can discus and test also mx 1703 [emoji6]




  13. #13
    Registered cookie's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    144
    Quote Originally Posted by mx1703 View Post
    Same as my setup, I have tried all the settings I can think of but the centering problem still remains
    Can you use the window snipping tool and give us a look at your setting in Mmos and Granity, it's a shame you can't get it working right because the OSW is superb in rFactor 2 even better than my AccuForce wheel, anyway here's mine for the flat6 mod and FFB smoothing 3 inside rFactor.
    '



    Click image for larger version. 

Name:	Capture.PNG 
Views:	451 
Size:	183.1 KB 
ID:	19947Click image for larger version. 

Name:	Capture.PNG 1.PNG 
Views:	318 
Size:	181.3 KB 
ID:	19948Click image for larger version. 

Name:	Capture.PNG 2.PNG 
Views:	322 
Size:	169.3 KB 
ID:	19949Click image for larger version. 

Name:	Capture.PNG 4.PNG 
Views:	474 
Size:	23.2 KB 
ID:	19950Click image for larger version. 

Name:	Capture.PNG 5.PNG 
Views:	429 
Size:	10.2 KB 
ID:	19951Click image for larger version. 

Name:	Capture.PNG3.PNG 
Views:	372 
Size:	157.5 KB 
ID:	19952

    Controller.rar
    Last edited by cookie; 05-12-16 at 07:38 AM.

  14. #14
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    Fixed I changed the Torque bandwidth limit from 330Hz to 470Hz

    Here are my settings

    Simtech Wheel.zip

    Click image for larger version. 

Name:	MMOs.png 
Views:	507 
Size:	21.8 KB 
ID:	19966

    Click image for larger version. 

Name:	Granity1.png 
Views:	298 
Size:	65.2 KB 
ID:	19968

    Click image for larger version. 

Name:	Granity2.png 
Views:	259 
Size:	65.0 KB 
ID:	19969

    Click image for larger version. 

Name:	Granity3.png 
Views:	228 
Size:	38.7 KB 
ID:	19970

    Click image for larger version. 

Name:	Granity4.png 
Views:	274 
Size:	49.7 KB 
ID:	19971
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Granity.jpg 
Views:	218 
Size:	55.3 KB 
ID:	19967  
    Last edited by mx1703; 05-12-16 at 08:22 AM.

  15. #15
    Registered cookie's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    144
    What are you driving with a steering lock of 180? go-kart,you can go as high as 3300Hz Torque bandwidth limit, anyway glad you got it sorted.

  16. #16
    Newer Member mx1703's Avatar
    Join Date
    May 2016
    Posts
    10
    F1 I like it that way what do you use?

  17. #17
    Registered cookie's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    144
    I'm a tin top man, only openwheeler I drive is the Skip Barber

  18. #18
    Registered Juan's Avatar
    Join Date
    Aug 2015
    Posts
    31
    Quote Originally Posted by Prodigy View Post
    Look for this line in your controller.json:

    "Steering effects strength":-10000

    Default is at 10000, if you want to revert FFB, add a minus sign (-) like above.
    awesome !!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •