NOTICE Notice: This is an old thread and information may be out of date. The last post was 432 days ago. Please consider making a new thread.
Page 2 of 2 FirstFirst 12
Results 21 to 21 of 21

Thread: GS 4 seats

  1. #21
    Registered Joe's Avatar
    Join Date
    Nov 2013
    Quote Originally Posted by MrJack View Post
    I have a 2dof simulator (scn5) and I would like to test the spring harness system .
    My first test was not great ..
    So, what spring force do you use ?
    You can see my first test, with two different spring, but not good ..
    I got mine at ACE hardware store. Mine is much shorter than yours, which could be harder (bigger k value. I think it also depends on your actuators. If your actuators are weaker, then may not be able to output enough torque to push the seat far enough. I noticed that
    the support points of actuators connected on your seat are at around mid of the seat, not at top of the seat.

    Update: If you are using SimX SW, you may need to turn up the Braking-g strength all the way to 300%. Works well with rF2 cars as I tested. But not great on AC cars.
    Last edited by Joe; 09-19-16 at 10:25 PM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts